Marina Pool, Spa & Patio
7777 West Jewell Avenue
Lakewood, Colorado 80232
OR follow our simple Troubleshooting Guide to determine the problem on your own. We'll send you the part immediately and our prices are the best in the country!
Visit our website at http://www.marinapoolspaandpatio.com/catalog/11 to shop for parts online now!
Is your cleaner too old to repair?
Visit our website at http://www.marinapoolspaandpatio.com/catalog/55 for the best prices on brand new Smartpool, Dolphin, Hayward, or Pentir Pool Cleaners. Be sure to email us at marinapoolandspa@aol.com or call 303-985-0077 for additional pool cleaner rebates and discounts.
Nitro Troubleshooting Guide
Description
|
Reason(s)
|
Troubleshooting
|
Solution
|
Dead in Water
|
Defective Power Supply, Cable or Pump
|
1) Check voltage from Power Supply (~ 30 Vdc)
2) Check continuity/voltage through cable (~30 Vdc)
3) Check for water entry to Pump
4) Check voltage to Pump Motor (~30 Vdc)
|
The problem lies where the power dies.
|
Unit not moving
|
0 Vdc to Drive Motor or Defective Drive Motor
|
1) Check voltage to Drive Motor (~18-20 Vdc)
|
If the voltage to the Drive Motor is ~18Vdc then the motor is defective and should be replaced. If the voltage to the Drive Motor is 0Vdc then the Pump Motor should be replaced.
|
No Suction
|
Defective Cable or Defective Pump Motor
|
1) Check voltage from Power Supply (~ 30 Vdc)
2) Check voltage through cable (~30 Vdc)
3) Check voltage to Pump Motor (~30 Vdc)
|
The problem lies where the power dies.
|
Unit Standing/Making Frequent Turns
|
Defective Pump Motor or Defective Sensor Wheels
|
1) Check for water entry to Pump Motor
2) Check continuity through Sensor Wheels
|
If there is continuity to through the Sensor Wheels then there is an issue in the programming and the Pump Motor should be replaced. If there is a defect found with the sensor wheels then the Chassis has to be replaced.
|
Description
|
Reason(s)
|
Troubleshooting
|
Solution
|
Unit Spinning (NC71)
|
One side of Drive Motor is Defective
|
1) Rotate motor by hand to feel resistance
2) Test Drive Motor independently
|
If there is a large amount of resistance in one side of motor; then the motor is defective.
|
Unit Floating
|
Old Style Filter Bag or Fault in Vertical Sensor
|
1) Check Filter Bag and replace with new if necessary-test
2) Check sensor in pump motor
|
If the cleaner has an old style filter bag and the vertical sensor is ok; then test the cleaner with a new style filter bag.
|
Unit Not Climbing
|
Worn Brushes/Ring, Defective Cable, Drive or Pump Motor
|
1) Check for wear on brushes/ring
2) Check voltage from Power Supply (~ 30 Vdc)
3) Check continuity/voltage through cable (~30 Vdc)
4) Check for water entry to Pump
5) Check voltage to Pump Motor (~30 Vdc)
6) Check voltage to Drive Motor (~18-20 Vdc)
7) Check continuity of sensor wheels
|
Change all worn parts if necessary. Check the vertical sensor and any sign of water entry to the pump motor. The problem lies where the power dies.
|